To fabricate your Inventor designs on the Bantam Tools Milling Machine, a few steps are required.

When you select a sequence of several virtual lines, only the points connected to model edges or sketch elements are updated, but all other points stay fixed at the defined X-, Y- and Z-positions.Autodesk Inventor is a favorite tool of engineering professionals.

Whenever the model is changed and synchronized, the geometry is updated with the model.

When you select a virtual line between two edges, the line behaves as a spring.

The following rules apply to the virtual line selection using the Point to Point option: You cannot select a point that is not located on an Autodesk Inventor entity (if you need to select such a point, add a planar surface under the model and select the points on that surface). Any change made to the model or sketch does not update the selected geometry.

InventorCAM saves the X-, Y- and Z-coordinates of the selected points. Associativity: InventorCAM does not keep the associativity to any selected point. Point to point This option enables you to connect specified points the points are connected by a straight line. Any change made to the model or sketch automatically updates the selected geometry. Associativity: InventorCAM keeps the associativity to any edge or sketch entity. A closed geometry chain is defined on this loop, and the secondary loop is rejected. You are prompted to accept the chain that is now highlighted with yellow color.

Click on any other edge comprising the face. The second loop is considered to be the secondary and is highlighted with white color. The first determined loop is considered to be the primary and is highlighted with yellow color.

Two faces to which this edge belongs are determined, and their loops are highlighted. Loop This option enables you to select a loop by picking one of the model edges. Close Corners option and regenerates the extension of the chain elements so as to close the gaps.

Inventor cam software